[Risolto ]pclos errore avvio modalità ripristino...

[nik57]

premesso che l'avvio normale funziona, volevo cambiare la pw root e cercando di avviare in modalità ripristino mi compare 

Codice:

telling init to go to single user mode.
INIT: Going singleuser
sh-5.2#

sono comunque riuscito ad entrare come root e modificare la password, ma vorrei riavere la schermata con le varie voci

Codice:

[root@localhost root]# inxi -Fxz
System:
  Kernel: 6.1.8-pclos1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    Desktop: MATE v: 1.26.2 Distro: PCLinuxOS 2024
Machine:
  Type: Desktop System: Hewlett-Packard product: HP EliteDesk 705 G1 DM v: N/A
    serial: <filter>
  Mobo: Hewlett-Packard model: 225E serial: <filter> UEFI: Hewlett-Packard
    v: L06 v02.22 date: 07/13/2015
CPU:
  Info: quad core model: AMD A8 PRO-7600B R7 10 Compute Cores 4C+6G bits: 64
    type: MT MCP arch: Steamroller rev: 1 cache: L1: 256 KiB L2: 4 MiB
  Speed (MHz): avg: 2200 high: 3100 min/max: 1400/3100 boost: enabled cores:
    1: 3100 2: 1900 3: 2400 4: 1400 bogomips: 24755
  Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3
Graphics:
  Device-1: AMD Kaveri [Radeon R7 Graphics] vendor: Hewlett-Packard
    driver: amdgpu v: kernel arch: GCN-2 bus-ID: 00:01.0
  Display: server: X.org v: 1.21.1.10 driver: X: loaded: amdgpu,v4l
    dri: radeonsi gpu: amdgpu resolution: 1920x1080~60Hz
  API: OpenGL v: 4.6 vendor: amd mesa v: 23.3.2 glx-v: 1.4
    direct-render: yes renderer: AMD Radeon R7 Graphics (radeonsi kaveri LLVM
    15.0.6 DRM 3.49 6.1.8-pclos1)
Audio:
  Device-1: AMD Kaveri HDMI/DP Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel bus-ID: 00:01.1
  Device-2: AMD FCH Azalia vendor: Hewlett-Packard driver: snd_hda_intel
    v: kernel bus-ID: 00:14.2
  API: ALSA v: k6.1.8-pclos1 status: kernel-api
  Server-1: JACK v: 1.9.21 status: off
  Server-2: PulseAudio v: 16.1 status: active (root, process)
Network:
  Device-1: Intel Wireless 7260 driver: iwlwifi v: kernel bus-ID: 03:00.0
  IF: wlan1 state: down mac: <filter>
  Device-2: Broadcom NetXtreme BCM5762 Gigabit Ethernet PCIe
    vendor: Hewlett-Packard driver: tg3 v: kernel port: N/A bus-ID: 04:00.0
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 238.49 GiB used: 14.5 GiB (6.1%)
  ID-1: /dev/nvme0n1 vendor: Patriot model: M.2 P300 128GB size: 119.24 GiB
    temp: 29.9 C
  ID-2: /dev/sda vendor: Lexar model: SSD NS100 128GB size: 119.24 GiB
    temp: 32 C
Partition:
  Message: No partition data found.
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 38.1 C mobo: N/A gpu: amdgpu temp: 37.0 C
  Fan Speeds (rpm): N/A
Info:
  Processes: 236 Uptime: 1h 53m Memory: total: 8 GiB note: est.
  available: 6.77 GiB used: 2.32 GiB (34.3%) Init: SysVinit runlevel: 5
  Compilers: gcc: 12.3.0 Packages: N/A note: see --rpm Shell: Bash v: 5.2.21
  inxi: 3.3.31

ps non ho effettuato l'ultimo aggiornamento, ho mantenuto il kernel 1:20230725-1 del 2023 perché quello del 2024 mi da problemi (la iso creata con MyLiveGTK non è avviabile da grub)